|
|
Oldham Multi-gas Detectors
All round high performance
c Exceptional configuration The MX 2100 multi-gas detector features a unique configuration allowing 4 measuring positions as standard for measuring 6 different parameters. The MX 2100 adapts to the needs of your activity, providing the following detection combinations : • 3 channels: toxic gases, CO2, O2 • 1 channel for explosive gases
c Universal explosimetry readingFitted with a sensor specifically designed for measuring most common explosive gases on a scale of 0 to 100 % LEL, the MX 2100 is practically a universal explosimeter. The MX 2100 also has a library of 32 pre-programmed gases for measurement of a dedicated gas.
c Choice of toxic gas and oxygen measurementWith the possibility of changing sensor blocks without adjustment you can choose from a large selection of sensors and use 4 of them simultaneously (with the CO/H2S option). This feature makes the MX 2100 a genuine portable analysis laboratory. New ethylene cell is available for fruit storage and fruit ripening monitoring.
c Conformity with the ATEX DirectiveThe MX 2100 meets all the new requirements of the ATEX Directive 94/9/EC giving it a very high safety level. This Category 1 device can be operated in zone 0 and with any gas or vapour concentration. This special feature taken with its other characteristics makes it the best performing device on the market.
c Total work environment monitoringGraphical display The LCD display unit features automatic back-lighting for alarms or faults. Its is a graphical display for easier measurement readout. • Measurement display : – display of 5 measurements with units and type of gas* – warning if any channel needs to be calibrated • Parameter display : – date and time – min. - max. (resettable) – STEL and TWA – remaining run time (bar graph) Warning lights A set of warning lights on the top of the unit displays alarms in all directions and in any work environment. Review The MX 2100 can be used to print a review of all events and measurements carried out. The variable storage interval can be set by the user who has the possibility of storing up to 200,000 records**. Work environment monitoring can be adapted to suit the activity. The safety manager and user have all the advantages of a highly developed management tool. Alarms • Gas alarms : – text messages for each channel on the display unit – flashing light signal common to all channels – audible signal – alarm acknowledgement compliant with safety rules • Alarm levels : – 2 instantaneous thresholds per channel in EXPLO and TOX modes – STEL/TWA in TOX mode – running average over 15 minutes and 8 hours – high and low thresholds (2 low thresholds as option) and 1 threshold for the catharometric channel Trouble alarms • Continuous luminous and audible signal common to all channels : – 20 % over alarm in negative mode – 120 % over alarm in TOX and oxygen mode – 100 % over alarm in EXPLO mode
c User-friendliness• At a single press of a tactile pad the MX 2100 runs self-diagnostics and indicates any anomalies; it continuously analyses the gases for which it has been programmed. Auto-zero is possible on demand or as a charger output (option). A quick operation allows the user to change the gas to be detected. The data-logging function allows storage of events and measurements with variable storage interval. Multi- user location identification is available with 32 texts of 16 characters. • COM 2100 software is used to supervise and maintain the device : – text display of measurements and channel parameters – troubleshooting if there is a problem – intuitive programming of the detector and measurement channels – option management – channel calibration via automated drop-down menu – printout of encrypted status sheet and test sheet – management, display and printout of stored events and measurements – protection by password • The MX 2100 can be linked to a PC via an infrared port for use on a suitably equipped computer. An adaptor module is available for other computers.
Versatility and modularity
`
(1) in ppm except for explo, CO2, CAT and O2 (% vol) (3) in % of the reading measure (6) in °C for cells (2) temperature at 20°C and atmospheric pressure, (4) in ppm sif no other indication - and per month (7) average (in month) in unit (% LIE, ppm) or % of the lecture (5) in seconds at 50% of the value
- Please link to the Technical characteristics to continue -
Download a full
specification for the MX2100 here (pdf)
For more information, please contact Technical Sales who would be delighted to discuss your needs |
| |||||||||||||||||
.JPG)
