[]
  • Australia
  • Brazil
  • China
  • India
  • Israel
  • Italy
  • Korea
  • New Zealand
  • Spain
  • Taiwan
  • USA
  • Philippines
  • Pakistan
  • Canada
  • Thailand
  • Malaysia
[]

Rapidox 3100E O2

Bench-Mounted Electrochemical Oxygen Gas Analyser

Bench-mounted O2 gas analyser based on electrochemical sensor technology with powerful internal sample pump, pressure correction and type K measurements. For on-line continuous O2 measurements in inert gases.

Next Product
Previous Product

Bench-Mounted Electrochemical Oxygen Gas Analyser

The Rapidox 3100E oxygen analyser allows accurate oxygen analysis over the range 0 to 100% O2 in steps of 0.1% The gas analyser provides continuous on-line oxygen analysis, with a typical response time of 20 seconds for a 90% response to a step change in gas compositions. At the heart of the Rapidox 3100E is a Yuasa electrochemical oxygen sensor, which has a five year life expectancy and can be used in a wide range of gases such as nitrogen, argon, helium, carbon dioxide.

The sensor is not affected by the presence of hydrocarbons and is resistant to attack from acid gases. The gas analyser contains a powerful Nitto motor-driven diaphragm vacuum pump which draws a gas sample at a rate that can be set by the user. The flow of gas can be adjusted using the flow gauge/needle valve on the front panel of the gas analyser. Typical flow rate is 1 litre per minute. Alternatively the pump can be independently switched off and operated under flowing gas conditions. An internal pressure sensor compensates for small changes in gas pressure to maintain the accuracy of readings.

The gas analyser is packed with features including fully programmable alarm circuits (voltage-free contacts), programmable analogue outputs (0-5V and 4-20mA), easy calibration (user selectable gases), RS232 (optionally RS485) communications and a full set of communications/data-logging software that is MS Excel compatible.

Optional swing handle, Peli-style carry case, printer and gas filters are available.

   

Alternative Rapidox 3100 O2 Only Gas Analysers

Please click for the Rapidox 3100 - High Speed Measurement

Please click for the Rapidox 3100L - Low Range Measurement

     

Alternative Rapidox Electrochemical Dual Gas Analysers

Please click for the Rapidox 3100EA - O2/CO2

Please click for the Rapidox 3100EB - O2/CO

Please click for the Rapidox 3100ED - O2/H2O

     

If you would like to purchase the Rapidox 3100E or have further questions please call technical sales on:

+44 (0)1480 462142

Images

Rapidox 3100E O2 Front Panel, click to enlarge

Rapidox 3100E O2 Front Panel

Rapidox 3100E O2 Rear Panel, click to enlarge

Rapidox 3100E O2 Rear Panel

Purchase
Price
Add to Basket
Thermal Printer (Battery Powered)

Portable battery powered printer

 
£323.00
Thermal Printer (Mains Powered)

Portable battery mains printer

 
£312.00
Heavy Duty Peli-Case

Peli-Case with bespoke custom insert for heavy duty transportation

 
£312.00
Basic In-Line Sample Filter

 
£34.00
Replacement Filters for Sample Filter

Replacement in-line sample filters (pack of 5)

 
£42.00
RS232 to USB Converter

Connects the Rapidox 3100 to computers without a serial port

 
£34.00
Gas Genie 101 Filter

Specialist filters used to remove all water from gases under analysis

 
£395.00
Gas Genie 101 Membrane Kit

 
£102.00
Gas Genie Avenger Filter

Specialist filters used to remove a large quantity of water from gases under analysis

 
£268.00
Gas Genie Replacement Filters

 
£87.00

For more information, please contact Technical Sales who would be delighted to discuss your needs +44 (0)1480 462142