![[]](/images/flagBarEnd.jpg)
Rapidox 3100Z O2
Bench-Mounted Zirconia Oxygen Gas Analyser
Bench-mounted precision oxygen gas analyser based on zirconia oxygen sensor technology with powerful internal linear piston sample pump, full pressure correction and temperature measurements using type K thermocouple 0-1250°C. Suitable for on-line continuous oxygen measurements in inert gases in the range 10-20ppm to 100% O2.
Download full Rapidox 3100Z specifications, documentation and updates
These software updates can be used with all Rapidox 3100Z models and is Windows 95/98/NT/2000/XP/Vista/7 compatible. Please download the correct version of the software for your machine firmware as described below:
1) Rapidox 3100Z Software (Firmware Version 8 and Higher)
*Select the latest software version if your Rapidox firmware is version 8 and higher. To check the current firmware switch on your Rapidox and read from the screen during bootup.
2) Rapidox 3100Z Software (Firmware Versions Lower than 8)
*Select this version if your Rapidox 3100Z firmware version is lower than 8 (applies only to older machines). To check the current firmware switch on your Rapidox and read from the screen during bootup.
![[]](/images/buttons/download.jpg){kind=small}
Documentation
Rapidox Software Technical Specification
(Cambridge_Sensotec_Rapidox_Software_V2_3.pdf)
Rapidox 3100Z O2 Front Panel, click to enlarge
Rapidox 3100Z O2 Rear Panel, click to enlarge
Replacement Internal Oxygen Sensor
Portable battery powered printer
Thermal mains powered printer
Peli-Case with bespoke custom insert for heavy duty transportation
Replacement in-line sample filters (pack of 5)
Connects the Rapidox 3100 to computers without a serial port
Specialist filters used to remove all water from gases under analysis
Specialist filters used to remove a large quantity of water from gases under analysis
