Rapidox 3100Z O2

Bench-Mounted Zirconia Oxygen Gas Analyser

Bench-mounted precision oxygen gas analyser based on zirconia oxygen sensor technology with powerful internal linear piston sample pump, full pressure correction and temperature measurements using type K thermocouple 0-1250°C. Suitable for on-line continuous oxygen measurements in inert gases in the range 10^-20ppm to 100% O₂.

Product Overview Features Applications Specification Software Accessories Downloads Related Products

Continuous gas sampling via powerful internally located linear piston pump

Flow rate controlled by needle valve / flow gauge on front panel

Very fast measurement response (around 5 seconds for a 90% response)

Full measurement range available (10e-20 ppm to 100% oxygen)

Accuracy ± 1% of the actual measured oxygen with a precision ±0.5%

Independent type K thermocouple fitted as standard. Range 0-1250°C

Easy to calibrate by the user using ANY TWO gases

RS232 / RS485, 0-5V or 4-20mA current loop outputs (both user programmable)

Windows data logging software with MS-Excel compatible graphing

Programmable alarms (low and high condition) with relay outputs, audible and visual warning

Unique sensor cleaning facility which can be operated at any time during use

Bench mounted gas sampling zirconia oxygen gas analyser.
Continuous gas sampling via powerful yet quiet internally located linear piston pump.
Flow rate controlled by needle valve / flow gauge on front panel.
Fast measurement response (typically 4 seconds for a 90% response)
Full measurement range available (10^-20 ppm to 100% oxygen)
High accuracy maintained throughout the measurement range. Accuracy ± 1%of the actual measured oxygen with a precision ± 0.5%
Nernst mode of operation for ultra low oxygen concentrations.
Independent type K thermocouple fitted as standard. Range 0-1250°C
Easy to calibrate by the user using ANY TWO or THREE gases (air is usually chosen for convenience)
Sensor life expectancy typically 35,000 hours.
Large back-lit LCD display showing % oxygen (selectable notation), temperature and pressure (user-selectable units)
RS232 / RS485, 0-5V and 4-20mA current loop outputs (fully user-programmable)
Windows data logging software with MS-Excel compatible graphing included.
Fully programmable alarms with outputs and visual /audible warning.
Unique sensor cleaning facility which can be operated at any time during use.
Optional printer, carry handle & transport case available.
Gas recovery bag available.
Compatible with DILO style gas recovery systems.