|
Rapidox 2100
 |
 |
Portable
on-line
zirconia oxygen analyser with rapid response long-life sensor |
|
|
Sensor (on 2m cable)
must be installed in gas stream by the operator |
|
|
Suitable for static or
flowing gas applications |
|
|
Installed directly in
gas pipes or gas tubing using the sampling chamber supplied |
|
|
Suitable for use in
vacuum applications with optional KF or CF adaptor |
|
|
New
helium mode for operating in helium gas mixtures |
|
|
Wide temperature range
(0 - 650°C) |
|
|
Perfect for furnace /
kiln applications & Flue gas monitoring |
|
|
Optional sample pump
attachment available |
|
|
Not suitable for use
with flammable gas compositions |
|
|
Auxiliary
pressure / vacuum or dew-point sensor option |
|
Rapidox 3100
|
|
|
Bench mounted zirconia
oxygen analyser with internal sensor & sample pump |
|
|
New dual gas version for
O2 & CO2 (0-5,0-10,0-20,0-100%) available |
|
|
New dual gas version for
O2 and CO (0-3, 0-10%) available) |
|
|
Sample flow rate
adjustable from 0 to 4 litres per minute |
|
|
Suitable for
applications where the gas must be sampled remotely using tubing |
|
|
Perfect for analysis of
static atmospheres or difficult to access locations |
|
|
Not suitable for hot gas
analysis (i.e. >150°C at point of entry into
analyser) |
|
|
Not suitable for use
with flammable gas compositions |
|
|
Suitable for moderate
vacuum applications & helium mixtures |
|
|
Rapidox 3100A
& B
|
 |
Bench mounted dual-gas analyser with internal sensor & sample pump |
|
|
O2 & CO2 OR O2
and CO versions available with choice of gas ranges |
|
|
Combined zirconia oxygen and Infra-red gas
detection technology |
|
|
Perfect for analysis of
static atmospheres or difficult to access locations |
|
|
Not suitable for hot gas
analysis (i.e. >150°C at point of entry into
analyser) |
|
|
Not suitable for use
with flammable gas compositions |
|
|
Full software and
data-logging facility |
|
Rapidox
4100
|
|
|
Electrochemical cell
oxygen analyser with internal sensor & sample pump |
|
|
Single point calibration |
|
|
Sample flow rate
adjustable from 0 to 1 liters per minute |
|
|
Suitable for
applications where the gas must be sampled remotely using tubing |
|
|
Perfect for analysis of
static atmospheres or difficult to access locations |
|
|
Not suitable for hot gas
analysis (i.e. >150°C at point of entry into
analyser) |
|
|
Range 0.1ppm to 100%
depending on the sensor |
|
|
Suitable for
hydrogen, helium, CO, CO2 gases |
|
Witt
Gas Analyser & Leak Detection
|
|
|
Range of hand held & stand alone gas analysers for O2 &
CO2 in modified atmosphere
packaging |
|
|
Specifically designed for the demands of the food industry (MAP) |
|
|
Sample
size only 5ml via a needle inserted into the pack |
|
|
Resistant to the effects of moisture in the packaging |
|
|
Perfect for use with packaging machines, in stores
or laboratories |
|
|
Range of leak testing
equipment all types of packaging based on
CO2 |
|
|
Fully automated on-line
factory installations available |
|
|
Buget M version now
available |
|
Oldham
Gas Detectors
|
|
|
Range of portable hand-held gas
detectors & personal toxic gas alarms |
|
|
Wide range of gases to chose from including O2,
CO, CO2, H2S
& Explosives |
|
|
Available with or without
LCD displays |
|
|
Tamperproof & Maintenance
free |
|
|
Loud audible alarm and visual indicator |
|
|
IP66 & ATEX Certified
(intrinsically safe) |
|
|
Extremely simple to use |
|
Viamed
Medical Oxygen Analysers and Monitors
|
|
|
Low cost hand-held oxygen gas analyser designed for medical and laboratory
applications |
|
|
0-100% O2
range |
|
|
Response time 8 seconds |
|
|
Large LCD display |
|
|
Two programmable alarm setpoints (MX300 only)
|
|
|
Sensor supplied on a 3m cable
|
|
|
Auto calibration |
|
|
2000 hours battery life (3 x AA batteries) |
|
|
Sensor disconnect
alarm |
|
Viamed GB300 Industrial low-cost Oxygen Gas Analyser
|
|
|
Low cost hand-held oxygen gas analyser designed for
Industrial and laboratory
applications |
|
|
0 -100% O2
range |
|
|
Response time 8 seconds |
|
|
Large LCD display |
|
|
Sensor supplied on a 3m cable |
|
|
Auto calibration |
|
|
2000 hours battery life (3 x AA batteries) |
|
|
Supplied
in a IP66 rated hard plastic storage case |
|
Hitech
Oxygen Analysers and
dual Gas Analysers
|
|
|
Range of mid-priced oxygen gas analysers |
|
|
Wide range of
other gases monitored, including hydrogen, carbon dioxide, argon & sulfur
hexafluoride (SF6) |
|
|
Portable and bench mounted units available |
|
|
ppm and percent ranges available |
|
|
Mains and Battery powered versions |
|
|
Large LCD displays |
|
|
Programmable alarms and outputs |
|
|
High accuracy and fast response time |
|
|
Low maintenance |
|
Oldham Multigas Detectors
|
|
|
Up to four different gases detected and
displayed simultaneously |
|
|
Wide range of cells available including O2, CO, H2S,
CO2, Explosives, NOx, SOx, NH3, O3, Cl2,
H2, HCl and many others |
|
|
Runs of NiMH rechargeable batteries |
|
|
Fully programmable alarms with 90dB siren and
flashing lights |
|
|
Sample pump option available that clips on
the top of the main unit |
|
|
High accuracy and fast response time with smart
interchangeable cells |
|
|
Low maintenance - unit self calibrates when
powered up |
|
|
IP66 rated and fully ATEX approved for
use in the harshest conditions |
|
Industrial Gas Transmitters
|
|
|
Rugged industrial transmitters supplying 4-20mA
signal along 15m cable |
|
|
Wide range of cells available including O2, CO, H2S,
CO2, Explosives, NOx, SOx, NH3, O3, Cl2,
H2, HCl and many others |
|
|
Cells are fully calibrated in the factory and
are maintenance free |
|
|
High accuracy and fast response time with smart
interchangeable cells |
|
|
IP66 rated and fully ATEX approved for
use in the harshest conditions |
|
|
Suitable for ambient monitoring or
attaching to equipment / pipes / flues |
|
|
Range of multi-channel control panels
available with integral displays and alarm relays |
|
Specialist Gas Analysers
|
|
Welding Gas
Oxygen Analyzers
|
|
|
1 to 999 ppm measuring range |
|
|
Zirconium Oxide Cell for
measurement accuracy and extended operational life |
|
|
Handheld, light and portable |
|
|
Rechargeable battery pack
with base station |
|
|
Integrated sample pump |
|
|
Interlock function for
orbital welding applications |
|
|
Can be used independently or
interfaced with any make of orbital welding controller |
|
Diving Analysers for Oxygen and Helium
|
|
|
Range of analysers for Divers |
|
|
Oxygen and helium analysis
available |
|
|
Portable and mains powered
versions |
|
|
Waterproof storage cases |
|
|
Fast analysis with minimal
gas loss |
|
|
Patented sensors with
enhanced stability |
|
|
Range of fittings for all
types of diving cylinders |
|
Stand Alone
Local Area Gas Monitors
|
|
|
Very High Safety Level area
monitor |
|
|
Can be used in zone 0 rated
areas |
|
|
1 to 5 gases including
toxic, oxygen & flammable |
|
|
Intelligent sensor blocks |
|
|
Long run time of up to 170
hours |
|
|
2 logical inputs and 2
logical outputs |
|
|
Can be trickle charged in
zone 0 locations |
|
|
Data logging |
|
|
Fully ATEX certified |
|
